Skip to content

How to Refinish a Wood Table {and Remove Water Stains} | Thrifty Decor Chick


I became our water-stained wooden eating desk into a good looking piece this is
safe towards meals and liquid!


In case you have an actual wooden piece of furnishings that has stains from meals and
beverages, this instructional will assist you to convey it again to existence. I am SO happy at
how this ended up!

We were given our eating desk years in the past at a neighborhood retailer in Indy known as City
Underpriced. I liked that it had a cast wooden most sensible, no longer simply veneer. The wooden
planks have the entire knots and imperfections that I believe offers furnishings

Sadly, we temporarily discovered there was once little to no protecting coat on
the tabletop. In the beginning it did not trouble me a lot, however after 5 years the
stains have been all over the place: 

water rings on wood table

This put up might include associate hyperlinks for
your comfort.

I might earn a small fee when you are making a purchase order via hyperlinks. 

We additionally had wine stains, oil marks or even some nail polish remover: 

oil water stains on wood table

It was once a large number! 

I in the end were given to it a couple of weeks in the past and the refinishing procedure went so
easily, I used to be kicking myself for ready see you later! 

Why does a mission move so simply once I assume it’ll be time eating, and
take ceaselessly once I assume it’ll be a couple of mins?? Each. time.

1. Sand down imperfections and water spots

Prior to sanding, I wiped down the desk neatly. You need to ensure there may be
no residue at the floor that would possibly gum up the sanding pad. 

In case you have any caught meals, use a putty knife to take away it earlier than

I used my
cordless orbital sander
for this process — I have long gone to battery-operated for the majority of my equipment
now, they usually make DIY such a lot more straightforward!:

The orbital sander has a spherical sanding house that accelerates the

I used to have issues of those sanders leaving skip marks — it might
power me loopy! In spite of everything that paintings, seeing the ones little
imperfections was once so irritating. 

See also  Christmas Front Porch Decor

I found out the reason for the ones skip marks have been from pushing too arduous on
the sander. In case you let it do it is process, the method is way faster and
more straightforward! 

Listed below are some elementary pointers for the use of an orbital sander: 

  • Get started with a rough grit sandpaper (I began with 80) and transfer to
    finer one (120 grit) to your remaining move.
  • Let the sander do the paintings! Don’t press arduous on it or you are going to get the
    dreaded the ones skip marks. Let it flow around the floor, and best upload
    a bit extra drive on areas of difficulty. 
  • Sand with the grain of the wooden.
  • Position the sander at the floor and then flip it on. Whilst you
    get started sanding whilst it is working, chances are you’ll harm the wooden or get the
    marks I used to be speaking about.
  • Empty the mud collector ceaselessly to stay the mud within the air to a

I used to be pleasantly shocked at how little mud settled within reach. I needed to
wipe down a couple of issues, however general the collector connected to the sander
does an ideal process. 

That oil mark pictured above took a couple of extra passes than the remainder of the
desk, and I had so as to add somewhat drive whilst operating on that spot. I
love to tilt the sander just a little so I will use the threshold of the pad on
drawback spots like this. 

2. Blank your floor neatly after sanding

After sanding, it would be best to do a just right cleansing to take away all
of the mud earlier than staining or treating the wooden floor. 

I vacuumed first, specializing in the grooves between the planks: 

vacuum sanded wood
A tack cloth is one of the best ways to take away the rest mud, as a result of it is
sticky floor grabs the whole thing, however is not rainy. 

I did not have one to hand, so I used a microfiber material as an alternative: 

cleaning sanded wood

If you are making plans to stain the wooden, the use of a rather damp rag is OK.
Getting the wooden rainy will open up the wooden after sanding, which is able to assist it
settle for the stain somewhat higher.

However I want to not use the rest rainy, as a result of it could actually make the imperfections
pop up once more. Now and again it occurs, every now and then it does not…however on extra
porous wooden like this one I did not wish to take an opportunity. 

See also  Flooring Us : Artisan Hardwood Innova Collection Spc Flooring In Howell Mountain Color Call Us For More Info Vfo Flooring : I have standard hardwoods throughout the rest of my 100 year old home yet none of those are cracked.

3. Make a choice your protectant

I sought after to stay the herbal glance of the wooden so I wasn’t going to stain
this piece. That is how the desk sorted the sanding and

sanded wood table

I exploit polyurethane on surfaces that do not get as a lot put on and tear — like
cabinets or constructed ins. On tables and counters I a lot want the herbal
end and glance of Tung oil. It will give you the sturdiness of alternative varnishes,
but in addition in reality brings out the herbal colour of the wooden.

Over time, I have used each natural Tung oil and a “end” model
that has some components, and each cling up fantastically. Natural Tung oil has no
components, however takes longer to dry. 

There are SO many advantages of Tung oil:

  • The end does not yellow or darken through the years.
  • It offers a protecting, herbal sheen to the wooden end. I to find shiny
    polyurethanes display scratches and scrapes extra.
  • Tung oil is eco-friendly and made with overwhelmed seeds from Tung tree

  • Natural
    Tung oil is meals protected and non poisonous. You’ll use natural oil on
    reducing forums, utensils or wooden bowls. (Let it treatment earlier than the use of.)
  • It is simple to use with only a comfortable material.

4. Making use of Tung oil

I exploit a foam brush when making use of polyurethane coats, however Tung oil is even
more straightforward!

Simply pour it at the floor and wipe it in with a lint unfastened rag, with the
wooden’s grain: 

applying Tung oil to wood

I like to recommend dressed in gloves all through the applying! 

  • Use a beneficiant quantity and wipe it into the wooden. You’ll be able to see the effects
    straight away! 
  • Wait 10-Quarter-hour after which use a blank rag to wipe up any extra and buff the skin (rub the oil into the wooden).
  • You’ll do a gentle sanding with a positive metal wool in between coats, however
    for those who prepped neatly, that’s not important more often than not.

Dry instances can range according to the humidity and product you employ. 

Natural Tung oil
can take two to 3 days to dry, however Tung oil finishes which might be a mix
best take 24 hours, every now and then much less.  

See also  Vinyl Flooring Eco Friendly - 4 0mm Regular Living Room Spc Vinyl Flooring Environmental Friendly Spc Vinyl Floor Supplier - See full list on

5. Upload sufficient coats

The instructions all the time name for a large number of coats, however on some items I to find
that is not important. I best do one (perhaps two) once I retouch our
island once a year or so, and that holds up nice

Extra porous wooden (huge pores within the wooden) like our desk soaks in
no matter you follow, so extra coats are important.  

Our maple counters at the island are not as porous and take much less coats.

I will inform simply by having a look if I wish to upload extra after the primary coat. Use
the sunshine and have a look at the skin at an attitude: 

uneven finish Tung oil

See the shinier portions? That is the place the end lined neatly. The matte spaces
are wooden that absorbed the oil and nonetheless wishes extra coats. 

In general I carried out 3 coats and since I wasn’t the use of natural Tung
oil, it took lower than an afternoon to dry between coats. 

The result’s a waterproof desk with a
beautiful satin end. Like maximum protecting merchandise, it
complements the glance of the wooden: 

natural wood finish tung oil

My ultimate coat was once lovely darn easy, however as a completion I really like to move
over it temporarily with a work of paper bag or kraft paper: 

sanding with paper bag

It is wonderful how simply that paper will knock down the tiniest imperfections
and depart you with a superbly easy end!


The most efficient section is that the Tung oil does not permit moisture to penetrate the

protect against water on wood

Our wooden desk is a richer tone now…you’ll be able to in reality see the diversities
and heat of the wooden:

natural wood finish with Tung oil

We LOVE it! 

Here is a reminder of the way it seemed earlier than: 

water stains on wood

All the stains are long gone and we have now a fantastic wooden tabletop!

wood dining chairs
was the similar lighter wooden because the desk, however I spray painted them
black a pair years in the past. We adore the distinction:
wood table black dining chairs
We changed the tall parson’s chairs on the ends with those
lower upholstered dining chairs, additionally from International Marketplace. The cats stored enjoying at the taller chairs and
knocking them over. 🙂

The brand new chairs are SO relaxed! I like the extra causal search for this

wood table with black chairs

Now the cats curl up in combination and cuddle in them as an alternative of mountaineering all
over! 😉 Neatly…for probably the most section.

sweet kitties

This refinishing instructional will paintings for any wood fittings piece. It’s going to
do away with the water spots and save you them from coming again!

Have you ever used Tung oil on any wooden surfaces in your house? 


Source link